PRACTICAL GUIDE
What is mastering and how to do it at home
It's one of the most confusing terms in music production — here's what it actually does, how it differs from mixing, and a basic chain you can build at home with free tools.
On this page7 sections
Mastering isn't "mixing louder"
Mastering prepares a finished mix for delivery: tonal and level consistency, transitions across multiple tracks, formats and final-file checks. It aims for reasonable translation across systems; it cannot guarantee identical playback everywhere.
It can address some overall issues, but if a voice is masked or an instrument needs an independent change, return to the mix. Keep that mix and the project so decisions can be revised.
The basic chain: gentle EQ, optional compression, a limiter, and a loudness check
Use only processes that help. One way to organize an experiment is:
- Tonal balance: compare with a reference and try moderate changes for a specific issue.
- Dynamics: decide whether compression is needed; listen to attacks, breathing and contrast between sections.
- Limiting, if needed: adjust action and ceiling. Limiters do not all control inter-sample peaks identically; verify the result, not just the knob position.
- Delivery: export to the agreed format and measure that file after sample-rate, bit-depth or codec conversion. Apply dither when appropriate at conversion to integer PCM.
An unclipped mix with headroom is easier to work with. A −3 to −6 dBFS peak may be a convenient example, not a universal requirement or repair for earlier clipping. Agree on delivery with the recipient and review gain staging.
What LUFS to aim for, depending on where you're releasing
Playback normalization depends on the service and listener settings. Spotify documents −14 LUFS for Normal mode; that reference is not mandatory for every delivery and does not determine artistic dynamics. EBU R 128 recommends −23 LUFS within its programme scope. Check the recipient’s current instructions.
HertzKit estimates loudness and true peak; it does not certify compliance. The editor changes gain and its ceiling may prevent reaching a LUFS target: it does not compress or replace a limiter. Sources: Spotify: normalization and EBU R 128.
Using a reference track
Choose an authorized reference with a comparable sonic intention. You can compare an unmastered mix with it if you match loudness and remember that its limiting and dynamics choices may differ. Listen to balance, attacks and clarity without trying to copy a number.
Compare equivalent kinds of passage and keep your previous version. The A/B comparator and mix lab help evaluate changes; they do not perform mastering.
Choose and check the limiter
First try your DAW’s limiter and check whether it meets your needs, including true-peak control where required. LoudMax by Thomas Mundt is a free alternative published by its author. Check compatibility, documentation and settings on that site; you do not need to replace a tool that already handles the job.
What a checklist can't replace
Before release, listen to the complete exported file, including start, end and transitions. Check version, channels, duration and format. Keep a copy of the prior mix and approved master.
A file without alerts does not guarantee good artistic judgment. If you need another perspective or demanding delivery, professional review can add judgment and control. The goal is a suitable delivery for that music, not loudness for its own sake.