PRACTICAL GUIDE

The relationship between time and frequency

Convert a repeating cycle’s period to Hz and connect tempo with an LFO or delay. Distinguish period, duration and musical pitch through examples.

On this page5 sections

For session work, the delay and reverb calculator gives the same interval in milliseconds and Hz. At 120 BPM, a straight eighth is 250 ms or 4 Hz: copy ms for delay time and Hz for an LFO. Starting points keep your tempo; the metronome link uses its quarter-note equivalent.

One cycle per second, or one second per cycle

Frequency and period describe a regular repetition: f(Hz) = 1 / T(s). In milliseconds, T(ms) = 1000 / f(Hz). For example, 2 Hz corresponds to 500 ms per cycle. This relationship does not turn any audio duration into a note: first identify what is repeating.

At 120 BPM with a quarter-note beat, each quarter lasts 500 ms and repeats at 2 Hz. A note held for 500 ms does not therefore have a pitch of 2 Hz. An A at 440 Hz has cycles of about 2.27 ms, even if you hold it for a second.

Why it matters for a musician or producer

The relationship appears in the rate of an LFO moving a filter, delay repetitions and tremolo frequency. For a periodic repetition, Hz and period describe the same repetition in two ways. Not every audio duration is a period: note duration or compressor attack does not by itself determine musical pitch. A speaker’s bass response depends on its design, enclosure, excursion and level; a wave’s period does not need to “fit” inside the woofer.

When a repetition may be heard as a tone

Speeding up a pulse train can produce a sense of pitch, but 20 Hz is not a universal boundary for every signal and listener. Waveform, harmonics, level and playback matter. Fast tremolo changes the spectrum of the sound being modulated; it does not guarantee an additional low note. The conversion gives the interval in ms and Hz. The calculator lets you hear it with an example hit; that audio does not predict how your instrument or effect will sound.

How to use this in practice

  1. If you have the song's tempo, the delay and reverb calculator already gives the Hz for each note value (quarter, eighth, etc.) at that BPM — it's the most direct route to a tempo-synced LFO.
  2. For a known period, the time to frequency converter calculates its reciprocal without tempo. Use positive finite values; zero has no finite reciprocal frequency.
  3. The frequency to note converter goes a step further: if what you care about isn't the time but which musical note a frequency corresponds to, that's the next tool.

To start from a frequency, enter 440 Hz: the period is about 2.272727 ms per cycle. You can edit either field and copy just the number into your instrument. Do not use the full duration of a note or file as the period of its waveform.

For example, at 120 quarter-note BPM, a dotted eighth lasts 375 ms: 250 × 1.5. An LFO completing one cycle in that time runs at about 2.667 Hz (1,000 ÷ 375). In the calculator, choose the note value and copy its milliseconds. If you count 60 dotted-quarter beats in 6/8, select that tempo unit: it equals 90 quarter notes per minute, not 60.