← All tools

Tuning, voice and ear training

Frequency to note converter

Enter a frequency to find its nearest note and deviation in cents. Compare both by listening, or choose a note on the keyboard.

1 · Find the note and deviation

Equal temperament · 12 semitones

20–20,000 Hz

400–480 Hz. Changing it keeps the frequency you entered.

Nearest noteA4La4

440 Hz

0.0 cents

Deviation from the nearest note

2 · Compare by ear

100 %

Applies to both playback options and the keyboard.

Start with your device volume low. Both references use a pure tone to compare tuning; you can choose piano for the keyboard. Not every frequency will be audible.

3 · Choose a key

The piano loads the first time you play.

C3–B4

Hold a key to hear it; release it to stop. The outline marks the calculated note.

Gestures and computer keyboard

Hold several keys with different fingers, or slide while pressing with a mouse or finger. With a key focused, A W S E D F T G Y H U J spans a chromatic octave; Enter or Space plays the focused key. Release to stop. Keys outside 20–20,000 Hz are disabled. Phones show one octave and wider screens show two. Sound stops when you leave the tab.

Reference frequencies · fourth octave
A4 = 440 Hz · equal temperament
NoteHz
C4261.6256
C♯4277.1826
D4293.6648
D♯4311.1270
E4329.6276
F4349.2282
F♯4369.9944
G4391.9954
G♯4415.3047
A4440.0000
A♯4466.1638
B4493.8833

From Hz to a note

  1. Enter a frequency and change the A4 reference if needed. The result shows the nearest note, its Hz and the difference in cents: positive is higher; negative is lower.
  2. Under Listen to, choose the entered frequency or the nearest note to compare them. Press the button to start and again to stop. Changing frequency, reference or octave stops sound; it does not start another playback. You can adjust volume while listening; it also controls the keyboard.
  3. Choose a starting octave, or use Show note on keyboard when it is outside the view. Pressing a key replaces the frequency with that note's frequency at your chosen reference. The piano uses recordings and decays naturally; Pure tone sustains while you hold the key.

What cents represent

100 cents is one semitone in this system. With A4 = 440 Hz, entering 442 Hz gives A4 and about +7.9 cents. The reading has one decimal place: it is a rounded calculation, not a measurement of your instrument.

A note, not a key

The tool uses twelve-tone equal temperament and scientific octave notation: middle C = C4/Do4. Names appear in letter notation and solfège. An isolated frequency does not identify chords or a song's key.

How the calculation works

The position relative to A4 is 12 × log₂(frequency ÷ reference). The nearest semitone is chosen, then the deviation is calculated as 1,200 × log₂(frequency ÷ that note's frequency). At an exact midpoint between notes, the higher note is chosen.

Sharps are used as reference names: C♯ and D♭ coincide in this temperament, but their musical spelling depends on context. Note frequency is copied with up to eight significant digits; internal calculations are not rounded before deriving cents.

Frequently asked questions

Does frequency also determine the chord or key?

No. It describes a pitch and its distance from a note in the chosen system. A chord or musical key needs context and relationships between several notes.

What changes when I adjust the A4 reference?

Note frequencies are recalculated from that reference. The tool uses twelve-tone equal temperament; it does not represent every tuning system.