HERTZKIT / PRACTICAL GUIDE

Separate your audio and prepare a practice session

Use the separator, choose a section and check the result, download vocals and instrumental and practice your own or authorized material in HertzKit.

On this page7 sections

By Marcelo Borasi · Updated November 3, 2026

Separating vocals and instrumental can help study a recording and prepare practice material. Separation can leave vocal or instrumental remnants and alter some sounds. Listen before relying on the result.

Authorization and device first

If the full PCM WAV exceeds the limit, prepare a section in the Trimmer. Export it and load it in the Separator. Start where the vocals overlap most with the other instruments and listen to both outputs before using either.

Use your own recordings or material you are authorized to process. The tool does not grant permission to publish stems derived from someone else's song. Your audio is processed on your device; email verification manages access and does not send your audio. A computer is recommended. Separation needs available memory and can fail on phones.

The first use needs to download additional files and may take longer. Your browser tries to save them to speed up later uses. Prepare your first use while online and keep the page open during processing.

Choose full audio or a section

  1. Open My account, verify your email and save your profile. Then open the separator.
  2. Load mono or stereo MP3 or WAV. Common and special access allow a complete file up to 10 minutes and 128 MB.
  3. The full audio is selected when loaded. Press “Separate full audio”, or turn on “Choose a fragment” to adjust the start and end. Each section you separate counts as one start within the hourly limit.
  4. Compare original, vocals and instrumental. Switching between playing tracks keeps the position.
  5. Listen to the outputs and download the WAV files before leaving. You can choose another section after finishing or cancelling the current separation, provided you have not reached the hourly limit.

Usage and retries

You can start another separation after finishing or cancelling the current one, without a fixed wait between files. Free access allows up to 12 starts per hour per account, including retries. One separation runs at a time in this tab. File limits and abuse protection still apply.

Finish or cancel the current separation before loading another track.

Free access does not require a paid subscription or newsletter signup. Speed and results depend on the device and recording.

What to practice next

When separation finishes, choose Vocals or Instrumental and use “Open in Speed Changer” or “Open in Practice”. Keep the original tab open until the audio arrives. You can also download the WAV.

Load the downloaded instrumental into the speed and pitch tool. For Practice, use a clean monophonic phrase: one voice or instrument at a time. Separated vocals with remnants or harmonies can prevent reliable readings. Load downloaded files into each tool; there is no automatic transfer.

Original exercise: record your voice with your own accompaniment, test a region and describe remaining sounds in both stems. Separation remnants are not evidence of pitch mistakes.

If something fails

Try CPU if GPU mode fails and choose a shorter region. Keep the tab open during processing. A daily-capacity message does not necessarily mean a file or device fault. WAV outputs and recordings are not stored in an account.

References and scope

Separation is an aid for listening and practice: it does not guarantee clean vocals, identify every instrument or grant rights to publish the outputs. Read the tool provenance and licenses and the access and privacy conditions.

← All guides

The same account for access

Use the same free account as elsewhere on the site. With a valid session and complete profile, you do not need another separator code. Email subscription and usage statistics are optional.