← All tools

Generate & process audio

Audio trimmer

Trim audio in your browser: pick the section on the waveform, listen to it, and download it as WAV. Your file is never uploaded to any server.

1 Load and listen

MP3, WAV and formats supported by your browser. Up to 10 minutes and 128 MB; mono or stereo.

Original waveform: drag the edges to trim; tap to seek.

0:00.000 / 0:00.000

Original shows the full track and plays only the selected section. Trimmed zooms into that section and plays the WAV with the selected fades.

2 Choose what to keep

Load audio to choose a section.

Reduces clicks at abrupt cuts. Turn it off to keep the selected samples without fades.

Choose a file or load the example to begin.

Changes become audible once calculation finishes. If playback was running, it resumes; if paused, it stays paused. Output is 16-bit PCM WAV at the browser’s working sample rate. Your original is unchanged. All processing takes place on your device.

How to use the trimmer

  1. Choose an MP3, WAV or the example. Drag the waveform edges or enter Start and End. The minimum selection is 50 milliseconds.
  2. Use Play, Pause and Stop to listen. The waveform and seek slider move playback within the visible audio; they do not change the trim boundaries. Loop lets you check the transition from the end back to the start.
  3. The trim is prepared automatically and includes Soften edges when enabled. The workspace stays on Original so you can adjust the edges. In Original, Play and Loop stay between Start and End. Select Trimmed to zoom into that section and hear the resulting WAV. If playback was running, it resumes once calculation finishes.
  4. Download the 16-bit WAV when satisfied. Boundaries are rounded to whole samples. WAV does not recover information lost in MP3; the browser’s working sample rate may differ from the original.
  5. Use the audio editor to join, reverse or normalize, or the speed changer for speed and pitch. Each tool opens a separate workspace: download your result to load it in the next tool.

Try a practical example

To prepare a practice phrase, choose the start and end on the waveform and listen to the whole selection. Leave a little room if the attack or decay is cut off. Download and open the WAV to check the intended passage; the original remains unchanged.

Files and progress

Up to 10 minutes and 128 MB per file, mono or stereo. Both limits apply. Supported formats and available memory depend on your browser and device; if you have trouble, try a shorter excerpt.

Loading and analysis may have several stages. If no percentage is shown, wait for completion or cancel. After downloading, open the file to check that it was saved correctly.

Prepare a track for analysis: a practical guide →

Frequently asked questions

Does trimming preserve the original file’s bytes?

No. The browser decodes audio and exports the passage as WAV. It is not a direct cut of original compressed data and cannot recover information lost in an MP3 source.

Why is there a click at a cut edge?

An abrupt cut away from a zero crossing can cause a discontinuity. Move the boundary slightly or enable Soften edges. For a loop, also listen to the end-to-start transition.