The first four open a Sessions activity using recorded piano. The other four play here. These are teaching examples prepared for HertzKit, not student recordings. Use a comfortable level; there is no autoplay or pass grade.

01Land on the pulse5–8 min · Playing

Goal: Keep six evenly spaced entries without anticipating the final C.

1. Listen and try

Listen to the whole phrase. Tap six beats, then play or sing the six notes. Record a first take without correcting it as you go.

Open activity and recordDownload .hksession activity

Once open, listen to the reference and use Record. Keep the take before leaving; download the activity to keep your audio. If you prefer not to record, practise by listening and complete the worksheet below.

2. Record your first impression

See the explanation and what to check

At 80 BPM, entries are 0.75 s apart; the final C starts 3.75 s into the reference. If you arrived early, repeat only the final two notes, keeping the beat through the preceding silence. An early entry does not mean the whole phrase is too fast.

3. Try another context

Return to the whole phrase and keep a final take. Then prepare a different six-note phrase at another tempo: can you keep the pulse without watching the waveform?

Prepare another reference →

Before continuing: Listen to the first and final takes against the same beat. Note whether the final C entry changed; if it is unclear, keep both and try the ending again.

This TXT keeps your notes, the task, the explanation and the next check, without audio. It is not saved automatically. To keep recorded takes, download the .hksession from Sessions.

02Hold and release the note5–8 min · Playing

Goal: Hold the first C for two beats and leave one silent beat before E.

1. Listen and try

Listen for the end of the first note. Count six beats: C on 1–2, silence on 3, E on 4 and G on 5–6. Play one note at a time; avoid sustain pedal so the rest stays audible.

Open activity and recordDownload .hksession activity

Once open, listen to the reference and use Record. Keep the take before leaving; download the activity to keep your audio. If you prefer not to record, practise by listening and complete the worksheet below.

2. Record your first impression

See the explanation and what to check

C lasts 1.5 s and E starts at 2.25 s. Piano resonance continues briefly after release: do not confuse that tail with holding the key. Listen to your take to separate note length, rest and entry; a pitch reading alone does not assess articulation.

3. Try another context

Record another take, changing only the release. Keep the one that respects the rest and note what you changed. Then try a phrase of your own with a rest.

Prepare another reference →

Before continuing: Before choosing a take, check that the rest before E is audible. Distinguish your release from the instrument’s resonance; a pitch reading cannot make that decision.

This TXT keeps your notes, the task, the explanation and the next check, without audio. It is not saved automatically. To keep recorded takes, download the .hksession from Sessions.

03Return to the starting note5–8 min · Playing

Goal: Return to the starting C after E, using A4 = 440 Hz as the reference.

1. Listen and try

Listen to C–E–C. Sing in a comfortable register or play on a monophonic instrument. Record without accompaniment or speakers leaking into the microphone; use headphones when listening to the reference.

Open activity and recordDownload .hksession activity

Once open, listen to the reference and use Record. Keep the take before leaving; download the activity to keep your audio. If you prefer not to record, practise by listening and complete the worksheet below.

2. Record your first impression

See the explanation and what to check

The phrase uses C4–E4–C4; C4 is about 261.6 Hz with A4 = 440 Hz. If the reading jumps, try a sustained note and reduce noise or clipping. Vibrato, attacks and octaves can make estimation ambiguous: do not turn an isolated reading into a grade.

3. Try another context

Repeat the return to C without watching the meter. If you need a different range, prepare a transposed activity with its own reference; do not compare different octaves as though they had the same target.

Prepare another reference →

Before continuing: Compare the first C, the last C and the reference in the same octave. If you cannot distinguish them confidently, try again more slowly; an unstable reading does not establish a wrong note.

This TXT keeps your notes, the task, the explanation and the next check, without audio. It is not saved automatically. To keep recorded takes, download the .hksession from Sessions.

04Ask for specific feedback8–12 min · Playing

Goal: Keep a first take and a final attempt; ask for one observation about the final D entry.

1. Listen and try

Record the phrase once. Select the ending, practise it and keep another take. Use the same microphone input and gain if you want to compare takes with the available indicators.

Open activity and recordDownload .hksession activity

Once open, listen to the reference and use Record. Keep the take before leaving; download the activity to keep your audio. If you prefer not to record, practise by listening and complete the worksheet below.

2. Record your first impression

See the explanation and what to check

The final D starts 2.67 s into this reference. Useful feedback identifies the take, moment and action: “The final D in take 2 was early; repeat E–D while tapping the beat.” Avoid “good” or “bad” without describing what you heard. The reviewer decides; an automatic score does not.

3. Try another context

Download the activity with your takes and send it to another person. They can open it in Review, add a time-linked observation and return the file. Open that copy in Practise before recording another round.

Prepare another reference →

Before continuing: The feedback should identify the take and moment without guesswork. Check that it suggests an action you can repeat; if you review your own file, identify the comment as your own.

This TXT keeps your notes, the task, the explanation and the next check, without audio. It is not saved automatically. To keep recorded takes, download the .hksession from Sessions.

05Separate level from preference4–6 min · Mix listening

Goal: Recognise how level influences a choice between two versions.

1. Listen and try

Listen to A and B with device volume fixed. Note which you prefer and which musical detail is easier to hear. Then open the explanation and try the level-matched comparison.

2. Record your first impression

See the explanation and what to check

B is the same signal as A with 6 dB less gain. Performance, EQ and compression are unchanged. In the matched comparison, both play the same attenuated signal: hearing no difference is consistent with how the example was made. Your initial preference may hold at that level, but it does not establish a better mix.

Matched comparison: both controls play the same B signal.

3. Try another context

Take two exports of your own to the Comparison tool. Use the same passage and playback matching; note whether your preference changes. The comparison does not modify the original files.

Compare my files →

Before continuing: Note whether matching levels changed your preference. Both controls in this matched example use the same file: hearing no difference is consistent with the example, not a failure of your hearing.

This TXT keeps your notes, the task, the explanation and the next check. It contains no audio or measurements and is not saved automatically. Keep any WAV exports separately.

06Reduce excess without losing body5–8 min · Mix listening

Goal: Distinguish a useful cut from a loss of body in the accompaniment.

1. Listen and try

Compare A and B while following the low notes. Then switch from B to C and listen to the guitar’s body. Write your impression before inspecting the settings.

Choose a version to play.

2. Record your first impression

See the explanation and what to check

A has a 6 dB boost at 260 Hz. B compensates with a cut in that region; C uses a 450 Hz high-pass filter that removes much more body. Loudness was approximately matched. Listen to B–C: less low end does not always mean useful clarity. These settings make the exercise audible and are not a preset for your mix.

3. Try another context

In the Workshop, choose EQ and try one cut on another recording. Also compare a passage where the instrument is exposed; keep the setting only if it improves the problem you identified.

Open the Workshop →

Before continuing: Keep the cut only if it addresses the excess you identified and retains the body you need in another passage. If the result becomes thin, reduce the change and compare again.

This TXT keeps your notes, the task, the explanation and the next check. It contains no audio or measurements and is not saved automatically. Keep any WAV exports separately.

07Hear compressor attack5–8 min · Mix listening

Goal: Identify how note onsets change when attack time changes.

1. Listen and try

Compare B and C, following the first moments of each note. Then listen to uncompressed A. Keep device volume fixed and describe an onset rather than just “louder”.

Choose a version to play.

2. Record your first impression

See the explanation and what to check

B uses a 0.5 ms attack and C uses 30 ms; threshold, ratio and release are shared before loudness compensation. C lets more of the onset through. B can soften it, but also changes character. There is no winning version for every instrument or compressor.

3. Try another context

Open the Workshop with a different source. Change only attack and compare A/B at matched playback level. Listen to the tail too: controlling the onset can expose noise or resonance.

Open the Workshop →

Before continuing: Choose according to the attack you want to retain, and listen to the tail too. Try the same setting on a quieter passage; if it loses detail, reconsider the change before keeping it.

This TXT keeps your notes, the task, the explanation and the next check. It contains no audio or measurements and is not saved automatically. Keep any WAV exports separately.

08Check what survives mono5–8 min · Mix listening

Goal: Distinguish stereo width from compatibility when channels are summed.

1. Listen and try

Listen to A, B and C in stereo, preferably on headphones. Enable mono summing while each plays. Do not turn up the volume when C disappears: it is a deliberately extreme case.

Choose a version to play.

2. Record your first impression

See the explanation and what to check

A has identical channels and survives. B delays the right channel by about 0.66 ms, changing the summed spectrum. C exactly inverts one channel; (L + R) / 2 equals zero. That silence is expected. In a real mix only one instrument may disappear: width does not establish mono compatibility.

3. Try another context

Check your own mix in stereo and mono. Disable doubled tracks or effects one at a time if something important disappears. Do not treat polarity inversion as a universal fix; a delay and an inversion are different problems.

Explore mono and phase →

Before continuing: Note which element changes when summed to mono, rather than only which version sounds wider. If the loss obscures the main part, first check the effect or doubled track causing it.

This TXT keeps your notes, the task, the explanation and the next check. It contains no audio or measurements and is not saved automatically. Keep any WAV exports separately.

For a 20-minute lesson

  1. 2 min: choose one practice and read its goal with the group.
  2. 5 min: each person listens and tries before reading the explanation.
  3. 5 min: compare a specific observation without grading taste.
  4. 5 min: repeat with another passage or material of your own.
  5. 3 min: download the worksheet or activity and agree what to practise next.

There is no need to share names or recordings with the group. Sharing a file is optional. Takes require microphone permission; do not record other people without their permission.

Prepare a lesson → · Prepare and check the offline package

The examples use authorised recordings. Automatic readings are indicative and may fail; the explanation does not certify a performance or delivery. Without JavaScript, copy the task and your observations into your own document. Piano provenance · Listening example provenance