Generate & process audio
White, pink and brown noise generator
Compare white, pink and brown noise, adjust playback and prepare a WAV sample with your filters.
1 · Choose the noise
StoppedReady to play.
View the signal
Output signal · illustrative view.
2 · Set playback
Changing the timer starts a new countdown from that moment.
Filters · optional
Reduce low or high frequencies. Applies to listening and the WAV.
Start at a low volume. The percentage does not measure the acoustic level of your speakers or headphones.
3 · Create a WAV file
A new sample using the selected colour and filters. Set its peak in dBFS; listening volume does not change the file. It does not record playback.
−60 to −1 dBFS. Independent of listening level.
WAV · mono PCM · 16-bit · 44.1 kHz
How to use the generator
- Choose a noise colour. Start with your device volume low and press Play. Adjust the level gradually. On mobile, expand View the signal if needed.
- Choose an automatic stop time if needed. Changing colour keeps the remaining time; changing the timer starts a new countdown. Stop ends playback at any time.
- Under Filters, reduce low or high frequencies. High-pass must be below low-pass; an invalid combination leaves the last valid playback filters active and displays a warning.
- To get a file, open Create a WAV file, choose 10, 30 or 60 seconds, set the peak in dBFS and press Prepare WAV, then Download WAV. If you change colour, filters, duration or peak, prepare it again. It creates a new sample using the settings captured at preparation, not a recording of what you just heard.
Playback and file
WAV is mono PCM, 16-bit, 44.1 kHz, with short fades and its peak adjusted after filtering. Its level is independent of playback. White has approximately equal energy per Hz; pink, per octave; brown emphasizes low frequencies. Pink and brown are approximate digital models. The level does not measure dB SPL or provide calibration. Noise is generated continuously where supported; the fallback uses a crossfaded loop. Leaving the page stops sound. Switching tabs may keep it playing; device locking, a call or browser policy may interrupt it. If that happens, press Play to start it again. Files are prepared on your device.
Frequently asked questions
How do white, pink and brown noise differ?
White noise distributes roughly equal energy per frequency; pink, per octave; brown attenuates treble more strongly. What you hear also depends on speakers and surroundings.
Does this generator measure or correct my room acoustics?
No. It generates signals without measuring the room or applying corrections. Acoustic response evaluation requires suitable equipment and a measurement procedure.