Record and review audio
Mix review
Review a mix with technical observations and listening points. Check what changes when summed to mono, without changing the file.
Looking for a different task? Measure loudness · Explore the spectrum and analyse excerpts.
1 · Load and listen
MP3 or WAV · up to 10 min and 128 MB · mono or stereo.
Tap the waveform to move playback. Analysis covers the whole track.
Mono and volume affect playback only. The mono sum has no volume compensation.
Choose your mix or try the piano.
Analysis runs locally. Your original file stays unchanged. Use your own or authorised material.
2 · Review and save
Load a mix and choose Review mix. You can listen to flagged regions and inspect the measurements.
Regions and details to listen to
Mono compatibility
Switch on Listen in mono and compare the same passage. A level drop alone does not prove a problem.
Loudness over time
400 ms windows every 100 ms. Unmeasurable regions have no trace.
Measurements use K-weighting and level gating. True peak is estimated by oversampling, not a certified measurement. Short or silent audio may not provide a useful loudness range.
Energy distribution by band
Spectral energy proportions from sampled windows. They do not identify instruments or tell you what to EQ. The arrangement and musical intent determine the right balance.
Calculate a gain change
−14 LUFS is an editable reference, not a universal requirement. This calculation does not change playback or the file. It uses uniform gain, without compression or limiting. Measure the final file again after editing.
How to review your mix
- Choose a mix or try the piano. You can listen before analysing.
- Choose Review mix. Analysis always covers the whole track.
- In Listen, try the flagged regions and compare stereo with mono. Open Levels, Balance or Gain when needed.
- Save the TXT report to keep the readings. Edit in your audio editor and compare versions in the audio comparator.
Measurements and limitations
Mono or stereo signals; it does not separate instruments or detect copyright. A sample near 0 dBFS does not prove distortion; negative correlation may be intentional. The engine cannot detect all problems, evaluate composition or guarantee distributor acceptance. Available memory limits practical file size.
Results and audio stay in this page until replaced or you leave. Download the report to keep it. They are not saved in an account or used to train a model.
Files and progress
Up to 10 minutes and 128 MB per file, mono or stereo. Both limits apply. Supported formats and available memory depend on your browser and device; if you have trouble, try a shorter excerpt.
Loading and analysis may have several stages. If no percentage is shown, wait for completion or cancel. After downloading, open the file to check that it was saved correctly.
Frequently asked questions
Is negative correlation always an error?
No. It may be intentional or confined to a passage. Listen to what changes when summed to mono. One measurement cannot tell you which instrument to adjust or by how much.
Does the report automatically master my song?
No. It describes the signal and calculates indicative gain. It does not EQ, compress, limit or repair distortion. Nor does it guarantee distributor acceptance: check your delivery specifications.