PRACTICAL GUIDE
Latency and buffer size: how to set them
Monitoring delay can come from the buffer, driver, effects or audio connection. Check the signal path before changing settings at random.
On this page6 sections
Latency is the delay between an action and the sound you hear. Monitoring an input through a DAW involves capture, processing and playback. Playing a virtual instrument takes a different path. There is no comfortable threshold for everyone: test with the actual instrument and task.
What buffer size actually is
The system delivers audio in blocks of samples. A smaller buffer leaves less time to complete work; a larger one can absorb some interruptions more reliably. Its size alone does not describe the equipment’s complete delay.
One block lasts samples ÷ sample rate. At 44,100 Hz, 128 samples represent about 2.9 milliseconds and 512 about 11.6 milliseconds. Adding one input and one output block is only an example: converters, drivers, additional buffers and effects can add delay. This calculation is not a round-trip measurement.
The cost of a small buffer: more strain on the processor
Small blocks leave less time to finish each task. Missed deadlines can cause clicks or dropouts. Close unnecessary tasks and try bypassing demanding effects before lowering the buffer further. Some plugins introduce their own latency even with a small buffer.
| Samples | Duration |
|---|---|
| 64 | 1.45 ms |
| 128 | 2.90 ms |
| 256 | 5.80 ms |
| 512 | 11.61 ms |
Calculation: samples ÷ 44,100 × 1,000. This is one block’s duration, not total latency or a measurement of your device.
When each setting makes sense
For recording or playing a virtual instrument, find the smallest setting that runs without dropouts in that project; 64 or 128 samples are possible tests, not requirements. Mixing without a live performer may allow 512 or 1024. Delay can still affect controls, external effects or new takes. Change one setting at a time and check the result.
The other way out: direct monitoring
If the interface offers direct monitoring, it lets you hear its input without passing through DAW effects. It does not remove every physical delay or provide a shortcut for hearing a virtual instrument. Avoid also hearing a delayed copy of that input: disable software monitoring for it while keeping it armed for recording.
HertzKit has no universal DAW buffer selector: the browser manages its own audio. For practice, try wired headphones and keep the page active. The slowdown tool and editor process files without that setting. For onset comparisons in Practice, read its latency guide: compensating a reading does not reduce the equipment’s physical delay.
References and next step
See Focusrite: buffer size · Focusrite: direct monitoring · MDN: browser audio latency.