← All tools

Rhythm & tempo

Rhythm trainer

Listen to four count-in clicks, then tap each beat using the pad or Space. Review your timing when the exercise ends.

1. Set up the exercise

2. Follow the beat

Ready to practise

—

Set the tempo and start when ready.

Details and report

Each tap is associated with its nearest beat, up to half an interval away. If several taps reach the same beat, it keeps the closest and the others are additional. “Not marked” means that no tap was associated. The offset column also shows taps more than 90 ms early or late.

BeatOffsetResult

The result stays in memory until you clear it, close or reload. It is not synced to your account. An interrupted exercise does not replace the last completed one.

Your first practice
  1. Choose tempo, beat count and volume. To start, try 8 beats at 80 BPM.
  2. Press Start and follow the four-click count-in. Start tapping with the next high click, once per beat using the pad, touch or Space. Keep this window active.
  3. At the end, review the result beside the pad on desktop or below on a phone. Stopping or leaving the window cancels without scoring; the last completed result is kept.

The circle lights up with each click. Pressing the pad or Space lights up the whole pad; the counter confirms that your tap arrived. Taps on the four count-in clicks are acknowledged but not scored.

How to interpret results

Recording and timing precision are separate. A tap can be early or late and still mark a beat. Each tap is associated with its nearest beat, up to half the interval away; an exact midpoint goes to the earlier beat. Each beat keeps its closest tap. Additional taps are listed separately. “Not marked” means no tap was associated, rather than simply outside ±90 ms.

“Within ±90 ms” counts marked beats inside that reference window; up to ±35 ms is “On the beat”. These are exercise references, not universal grades. Mean absolute offset shows how far your taps were from the click. Signed mean shows the average early or late tendency; opposite offsets can cancel. Both averages use all marked beats, excluding additional taps and unmarked beats.

The capture window extends from half a beat before the first exercise click to half a beat after the last. The four count-in clicks are not part of the result. Follow the sound; animation is a guide. Measurements include output, input and device delays, with no automatic calibration. Compare using the same equipment, preferably wired headphones. No microphone is used and no audio is recorded. TXT export and Clear result are beside the summary. Details and report shows each beat. The optional draft keeps settings, not taps or results.

A simple starting example

Try 8 pulses at 80 BPM. Press Start exercise, listen to the four preparation clicks, then tap once for each high click. Repeat with the same device to compare.

Frequently asked questions

Does the trainer listen to my instrument?

No. It evaluates the touches, clicks or key presses you use to mark the pulse. To compare a sung or played melody with a reference, use HertzKit Practice.

Does a positive offset mean I played late?

It means the input event arrived after the scheduled beat. This includes your performance and device delays. It is not an isolated measure of skill; use consistent equipment and preferably wired headphones.