PRACTICAL GUIDE
How to prepare MIDI for your DAW
Correct duplicate notes, review timing and tempo, quantize thoughtfully and export MIDI that preserves your performance.
On this page8 sections
First decide what to preserve
MIDI does not need to sit exactly on a grid to be useful. First listen for the intention: is this an expressive performance, a drum pattern or an audio transcription draft? Keep a copy of the original and start with one question: “Are notes left sounding?” or “Does the bass arrive before the kick?”
1. Review events before touching notes
Open the file in MIDI workshop. Loading selects Original: no changes have been prepared yet. Choose a setting in the first panel and press Prepare version to enable comparison with Prepared version. The report distinguishes unclosed notes, note-offs without a start, exact duplicates, zero durations and overlaps at the same pitch. An overlap is not proof of an error: it can come from legato, layered sounds or voices sharing a pitch. Choose a track and listen before enabling a repair.
Before downloading, check what quantization produced. A coarse grid with quantized ends can compress fast notes to one tick and make different notes coincide. Workshop keeps those coincidences and shows their counts; it does not delete them as source duplicates. Compare the Original/Prepared graph and listen to the passage. You can review the grid or prepare without quantizing ends; MIDI downloading asks you to review the notice when new consequences appear.
In Workshop, Apply settings to defines the scope of transposition, velocity and quantization. Show notes from filters the table without limiting the download. Manual edits stay attached to their notes even when you change the settings track. Prepare the version before comparing or exporting; a pending setting blocks modified exports so you cannot take an outdated result.
Correct one note before changing the whole track
- Open Edit notes in the original and choose the track under Show notes from.
- Change only the MIDI note number to correct pitch; 60 is C4 in HertzKit. Start and End are measured in quarter-note beats; velocity ranges from 1 to 127.
- Press Prepare version and compare Original with Prepared version. Undo, Redo and the note’s Reset button let you review manual edits; prepare again after any change.
- Download the modified MIDI when it matches your intention. Adding or deleting notes is a separate task for your DAW.
Workshop does not offer another complete original download: you already have it. Under Downloads, save the modified MIDI with prepared, reviewed changes, extract one track from Original or Modified, and download the TXT report. Playback and the table filter do not select what is exported. To compare an edited version, switch Original and Prepared version: playback position and track are retained. Quantization moves notes, not their channel controllers; check the result when using pedal, pitch bend or other expression distributed across tracks.
2. Understand each repair
Duplicate removal deletes note pairs sharing track, channel, pitch, start, end and velocity. Check for intentional layering. Closing open notes ends them at their track’s end: it cannot infer when a key was released. Removing unmatched offs deletes endings without a paired start in that track. All repairs are optional.
3. Quantize for a reason
Choose a grid matching what you actually played. A binary grid can distort triplets. Start gently, perhaps at 25%, and listen to the attack against the accompaniment. By default the start moves while duration is preserved. “Quantize note ends too” adjusts both ends and can change phrasing. A note is never deliberately reduced to zero duration.
4. Review pitch and dynamics separately
Middle C is MIDI note 60, although applications use different octave labels. Note velocity represents performance intensity for the instrument; it is not decibel gain. Changing velocity can also change timbre. By default, Workshop excludes MIDI channel 10 percussion from these adjustments; “Include percussion” applies them to those notes too. Transposition rejects notes outside 0–127. Your chosen range generates warnings only: it does not automatically identify a singer’s or instrument’s range.
To change pitch alone, the MIDI transposer shows original and shifted note ranges. Switch versions without returning to the start and keep the same track for comparison. Downloading applies the stated shift even when listening to Original. At 0 it keeps a byte-identical copy of the file. A declared key signature is shown as MIDI metadata, not detected musical key.
5. Compare and export
Each version is prepared from the original using current settings: preparing +2 twice does not accumulate +4. Prepare original playback, then edited playback. Download MIDI and the TXT report, and import into your DAW with the intended instrument and tempo map. HertzKit playback uses recorded reference instruments; check the final timbre and expression in your DAW.
When exporting one track
Individual export retains tempo, meter and key events from other tracks in a conductor track. It does not copy programs or controllers stored in other tracks. If tracks share channels or distribute controllers, export the whole project or verify the individual track in your DAW. Workshop supports formats 0 and 1 with PPQ, up to 5 MB, 256 tracks and 50,000 notes.