On this page5 sections

In the audio converter, follow the three steps: load audio, choose the output, then compare and download. Try the recorded piano to check WAV and MP3 before using your own file. Changing a setting prepares a new result automatically; wait until it is ready before downloading.

Your original file stays untouched when loading or analyzing it in HertzKit. Conversion produces a new export: MP3 → WAV does not restore discarded information, and WAV → WAV is not necessarily an identical copy. Check sample rate, bit depth, channels and dither; the converter does not copy metadata. Its initial output is 48 kHz, 24-bit WAV, and it does not automatically normalize floating-point samples that exceed integer PCM range. Keep the source and check the exported file. Read the explanation about originals and exports.

For space planning, one minute of stereo PCM at 48 kHz and 24 bits contains 17,280,000 bytes of samples (17.28 MB), before headers and metadata. Three minutes at 192 kbps CBR estimates 4.32 MB of data; the bitrate already includes all channels. The file size calculator distinguishes MB and MiB and can compare a limit without promising the final file size.

Choose for the delivery

For further editing or delivering a mix, PCM WAV is an option without lossy compression. MP3 and AAC reduce size by discarding information; converting them to WAV does not restore what was discarded. Check the recipient’s specifications. Keep the project and a high-quality export before generating sharing copies.

Sample rate and bit depth are different decisions

Sample rate describes how many samples per second the audio contains. Bit depth defines available levels in integer PCM. 44.1 and 48 kHz are common options, but choose for the project and delivery. Moving to 96 kHz does not add detail absent from the source. When exporting processed audio to integer PCM, dither can smooth quantization distortion at the cost of very low noise; it does not remove background noise.

Check the file, not just the dialog

HertzKit’s converter exports 16- or 24-bit PCM WAV, or MP3 at 128, 192, 256 or 320 kbps. Input depends on formats the browser can read. WAV offers 44.1, 48 or 96 kHz; MP3, 44.1 or 48 kHz. Keep channels or mix down to mono and check the result. Input is limited to 10 minutes and 128 MB, mono or stereo. Use a dedicated converter for batch exports or other formats.

Choose WAV for further editing or MP3 to share a smaller copy. The converter updates the preview automatically after setting changes and retires the previous download until ready. Compare Original and Converted: you hear the generated file before downloading. Initial output is 48 kHz, 24-bit WAV; MP3 starts at 192 kbps. The pre-conversion MP3 size is approximate.

MP3 applies lossy compression again. If the source is already MP3, making another MP3 can add losses; raising the bitrate does not recover discarded information. Keep the source. MP3 can include encoder padding, so its decoded duration may differ by a few milliseconds. Keep WAV for precise boundaries, loops or further editing.

Mono conversion averages channels: (L + R) / 2. Equal-amplitude channels with opposite polarity cancel. Keep the stereo original and listen before replacing it. In the speed changer and editor, changing settings clears the previous result and automatically updates the preview once processing finishes. Wait for the new result before downloading. The trimmer lets you hear the WAV you will save, including the selected edge fades.

In the audio editor, choose your edits, wait for the preview to update, compare Original and Edited, then download the WAV when ready. The waveform moves playback; it does not trim. The result shows the actual output sample rate and PCM bit depth. Its estimated peak ceiling may reduce gain even without normalization.

Sending several WAV files? Open them in the checker to see their properties side by side. Use a delivery order to flag missing files or exports that differ from the agreed requirements.

Check the WAV files for a delivery →

Put the idea into practice

Convert and check my file

Reference for further reading

Audacity: quality and dither.

To prepare versions as well as the file format, continue with music for video, podcasts and games.